Tuesday, 21 November 2017

Javi's Almost Impossible Challenge 2017- episode 187 - 197

Hi Everyone

Throughout the month of November I will be entering the Javi's challenge which will means one video a day all through November. These videos will be short due to the work load required to post them but hopefully you will find them entertaining. So join Chip and myself for the month of November.
This page will cover each day of video entries Starting at day 21 until day 30
I will add new videos to the page so bookmark it and check back each day.
Cheers
Peter

Where possible I will post links to the files I use however this will not be possible for projects.

Day 21 starts with a disaster and a Massage Roller which might come in useful later on.



Click to watch video

Files for this project courtesy of www.zenziwerken.de
Don't forget to check out the extensive range of CNC projects on his website.





Click to watch video

If you would lime to make your own Tablesaw Sled angle gauges here is the link to the files.
http://bit.ly/2zYqqf7





Click to watch video

Sorry no drawing available for this project.






Click to watch

Files for this project courtesy of www.zenziwerken.de
Don't forget to check out the extensive range of CNC projects on his website.






Click to watch

No file for this project as it is still a prototype. A new version will be created at a later date and files will be made available at that time for those interested.






Click to view

Trying out the filler I used to seal the MDF cupboard on a 3D model.
How well does it work?






Click to watch

A DIY Pizza Peel or Pizza Paddle if you prefer

If you would like to make your own you can find the files here. Please note that they are only available in VCarve Pro format as the fluted toolpath will not work in DXF format.
http://bit.ly/2AbBy8q





Click to view

This Boomerang file was created from a plan from the Kendall Davis website.
http://www.kendalldavis.us

The Ambidexter Boomerang plan. Use this shape your boomerang
Ambidexter.pdf

Only a VCarve file has been provided for this project as it uses a moulding toolpath that will not work in DXF format. The file was created using VCarve Pro 8.5 and will not open in earlier versions.
http://bit.ly/2Bkjpmb






Click to watch
While waiting for some varnish to dry I took a break and tested the Boomerang. A quick watch of a couple of youtube videos to see how to throw it and here is the result.






Click to watch
It's been a few years since I last did a PhotoVCarve. Looks like I still remember how.
I will make a new videoin the new year on how to use PhotoVcarve as it can be a bit of a blackart at times.





Click to watch

The final project of Javi's 30 Day almost impossible challenge. Thank you to all those who have taken the time to watched and commented on these videos. It has made it all the more enjoyable.
 Pushstick files:    http://bit.ly/2zAXKpw

Thanks once again.
Cheers 
Peter


Monday, 13 November 2017

Javi's Almost Impossible Challenge 2017- episode 178 - 186

Hi Everyone

Throughout the month of November I will be entering the Javi's challenge which will means one video a day all through November. These videos will be short due to the work load required to post them but hopefully you will find them entertaining. So join Chip and myself for the month of November.
This page will cover each day of video entries Starting at day 12 until day20
I will add new videos to the page so bookmark it and check back each day.
Cheers
Peter

Where possible I will post links to the files I use however this will not be possible for projects.

Day 12 starts with a office cupboard build.
Fear not, there will be some CNC work involved in this project but directly and indirectly.



Click to view

Part 1 of the Office Cabinet Build





Click to view video

If you would like the files to make your own corner clamps please follow the link below.





Click to view Video

Part 2 of the Office Cabinet Build





Click to view

Sorry, No file available for this project.





Click link to view

Part 3 of Office Cabinet build
Link to Hinge drills http://ebay.to/2hqf6Sn





Click to view


The Bubble Trivet file is located here:  https://www.zenziwerken.de/Household-Items/Trivets
Don't forget to checkout his website.





Click to view video
Another necessary tool for the Office cabinet build. This time made from a cutoff it will allow accurate drilling of the shelf pin holes.






Click to watch video
Final part of the Office cupboard build adding the shelves.







Click to view

Files to make your own Push Stick can be found here.     http://bit.ly/2hPdgKS





Wednesday, 1 November 2017

Javi's 30 Day Impossible Challenge 2017 - episode 166 - 177

Hi Everyone

Throughout the month of November I will be entering the Javi's challenge which will means one video a day all through November. These videos will be short due to the work load required to post them but hopefully you will find them entertaining. So join Chip and myself for the month of November.
This page will cover each day of video entries starting at day 1 and continuing to Day 11. I will add new videos to the page so bookmark it and check back each day.
Cheers
Peter

Where possible I will post links to the files I use however this will not be possible for projects.






Sorry no plan available or the angel project





Click to view video


I cannot provide the file used for this project but checkout the link below. It is a very similar puzzle and in some respects better. This is an excellent site for project ideas so check it out.





Click video to watch

There is no file for this project as it is custom made for a Dyco Saw which is a New Zealand made Tablesaw unlikely to be owned by any viewers. If you have a Dyco saw and would like the file please email me and I will be happy to share it.






Click to view video

This is a BigZ 3d puzzle posted by BigZ on the CNCZone. Mine was scaled to use 6mm MDF so remember to scale the model to suit your material.






Click video to view
 No File available for this project



 



Click Video to view
This video is not part of the Challenge but a Bonus into the workings of Chip.







 Click to View

These pipe clamp feet can be downloaded from     Pipe Clamp feet







Click to watch

Files to make your own Cribbage board can be downoaded from here: 





Click to view

The fiile for this project is courteousy of www.zenziwerken.de
Be sure to checkout his site for excellent projects.






Click to view

Sometimes you just need to try something for yourself and see what works with you.
The filler used for this is Haydn Professional filler.



Haydn Professional Filler 4 litre is a single pack, quick drying, water based filler, suitable for interior and exterior application. It can be applied over timber, masonry, plaster and primed metal. It has minimal shrinkage and can be nailed, screwed or planed and is easily sanded.





Click to view video


Files to make your own No Junk Mail Sign can be found below





Click to View

Files to make your own Pebble Smart watch stand available using the link below.
http://bit.ly/2hsuAW0